Concrete Breaker & Jackhammer
Rental New Hampshire

NorthPoint’s heaviest pneumatic jackhammer for large-scale concrete demolition, deep slab removal, and high-production trench work. 90 pounds of steel in a direct-blow air hammer delivers the impact force for the most demanding NH demolition jobs.

A 60-pound pneumatic jackhammer for residential concrete demolition, driveway and sidewalk removal, and trench access through concrete. More manageable than the 90lb for overhead or one-person operation while still delivering serious impact force.

A lighter 30-pound pneumatic hammer for smaller demolition tasks, chipping, and trench access in residential settings. More compact and easier to handle than the 60lb or 90lb for lighter-duty work where production speed is less critical.

NorthPoint’s heaviest electric jackhammer — professional-grade for large-scale electric concrete demolition. The Hilti TE 3000-AVR is the closest electric equivalent to the pneumatic 90lb for job sites where air is unavailable. Active Vibration Reduction (AVR) protects operator hands and arms during extended use.

A mid-weight SDS demolition hammer for breaking concrete, removing tile, chipping mortar, and light demolition work. The Hilti TE 700-AVR provides strong impact force in a more portable, easier-to-handle package than the TE 3000. Right for residential basement slab sections, footing chip-out, and masonry demolition.

The Bosch BH2770VCD is a professional electric breaker hammer and the most commonly recognized electric jackhammer for residential NH demolition. Delivers the impact force needed for slab breaking, driveway and patio demolition, and footing removal. No exhaust makes it suitable for enclosed spaces.

Mid-range SDS demolition hammer for residential concrete demolition, tile removal, and masonry chipping. The Hilti TE 1000-AVR delivers a good balance of impact force and maneuverability for jobs where the TE 3000 is too heavy but more force than the TE 500 is needed.

SDS-Max chipping hammer for light concrete removal, tile demolition, mortar chipping, and surface preparation work. The TE 500-AVR is the right tool when you need chisel action without the bulk of a full demolition hammer — removing tile adhesive, chipping away surface concrete, or removing old mortar joints.

SDS-Max rotary hammer combining drill and chip modes. For large-diameter anchor holes, dowel installation, and light demolition in one versatile tool. ATC and AVR provide safety and comfort. Bridges the gap between the TE 70 drilling hammer and the TE 700 demolition hammer.

A compact SDS-Plus rotary hammer for standard concrete drilling, anchor installation, and light chipping. The Hilti TE 30-AVR is the most compact electric hammer in NorthPoint’s fleet — easy to use in tight areas, on ladders, or overhead. Right for smaller anchor holes, electrical conduit drilling, and light demolition work.

Milwaukee’s 1-1/8-inch SDS Plus rotary hammer for standard concrete drilling, anchor installation, and light demolition. A reliable workhorse for plumbers, electricians, and general contractors on NH residential and commercial sites. Milwaukee ergonomics and durability in a standard SDS Plus platform.

Milwaukee’s 1-9/16-inch SDS Max rotary hammer for larger-diameter drilling and heavier hammer work than the SDS Plus model. The larger chuck size handles bigger carbide bits for anchor bolts, rebar dowels, and larger conduit holes. Milwaukee’s preferred platform for heavier concrete drilling work.