What Size Boom Lift Do I Need in NH?

Use this New Hampshire boom lift size guide to choose the right lift height and outreach for roofing, siding, tree work, maintenance, construction, and elevated access projects.

AI Summary

The right boom lift size depends on your working height, required outreach, ground conditions, and obstacles around the work area. Smaller boom lifts often work well for two-story homes and light exterior projects, while larger lifts are better for tall buildings, tree work, and more demanding commercial jobs. NorthPoint Equipment Rentals helps customers across New Hampshire choose the right lift for the job.

How to Choose the Right Boom Lift Size

Choosing the right boom lift is about more than just height. You also need to think about horizontal reach, the layout of the work area, any obstacles between the machine and the job, and how much space you have to position the lift. A machine that is too small can leave you short of the work area, while a machine that is too large may cost more than needed and be harder to position on tight sites.

Measure height from the ground to the highest work point

Check outreach if you must reach over obstacles

Evaluate terrain for rough ground, mud, or slopes

Match the lift to the actual project, not just building height

Common Boom Lift Sizes and Best Uses

The lift size you need depends on the job. The table below gives a practical guide for common boom lift ranges.

Boom Lift Size	Typical Best Uses	Good Fit For
35-40 ft	Light exterior work, lower rooflines, maintenance	Single-story and some two-story work, signage, small repairs
45-50 ft	Residential roofing, siding, tree trimming	Two-story homes, general contractor work, exterior access
60 ft	Larger homes, taller trees, commercial exterior work	Three-story access, higher tree work, bigger buildings
80+ ft	Large commercial projects and specialty access	High buildings, major exterior work, specialty contractor access

What Size Boom Lift for a Two-Story House?

Many residential customers ask this first. For a typical two-story house in New Hampshire, a boom lift in the 35 to 50 foot range is often the right fit, depending on the roof pitch, building setbacks, landscaping, porches, decks, and how far the lift must reach from where it can be parked.

35-40 ft Boom Lift

Works for some smaller two-story homes or direct-access work where the machine can be positioned close to the wall.

45-50 ft Boom Lift

Commonly the better all-around choice for two-story residential roofing, siding, painting, and general exterior work.

Why Extra Height Matters

You usually need more than the exact roofline height because the lift must position safely below and away from the work area.

What Size Boom Lift for Tree Work?

Tree work often requires more than just height. You usually need outreach to work around limbs, trunks, fences, landscaping, and uneven terrain. For many tree trimming jobs, a boom lift in the 40 to 60 foot range is common, but exact needs depend on the type of tree, work angle, and ground conditions.

Smaller Tree Jobs

40-50 ft lifts often work for residential pruning and branch removal
Good for lower canopies and tighter access areas

Larger Tree Jobs

60 ft and larger units may be better for taller trees
Important when the lift cannot be positioned directly under the work

What Size Boom Lift for Roofing or Siding?

Roofing and siding jobs are some of the most common reasons customers rent boom lifts in New Hampshire. For many residential projects, 45 to 50 feet is a practical range, but larger homes and commercial buildings may require more height and reach.

Project Type	Suggested Boom Lift Size
Single-story roof repairs	35-40 ft
Two-story roofing and siding	45-50 ft
Taller residential or light commercial work	60 ft
Large commercial exteriors	80+ ft

Other Factors That Affect Boom Lift Size

Height is only one part of the decision. These other factors matter just as much.

Horizontal Reach

If you need to work over decks, porches, landscaping, or lower roofs, you may need a bigger lift than the building height alone suggests.

Site Access

Narrow driveways, gates, soft lawns, and tight building clearances can affect which lift size and type will actually fit the site.

Ground Conditions

Rough or uneven terrain may require a different boom lift type or a larger machine with better outdoor capability.

Boom Lift Rental Cost in NH

Rental cost generally increases as the lift gets larger and provides more height and outreach.

Boom Lift Size	Typical Daily Cost	Typical Weekly Cost	Typical Monthly Cost
35-40 ft	$200 - $300	$700 - $1,100	$2,000 - $3,200
45-50 ft	$300 - $450	$1,100 - $1,600	$3,200 - $4,500
60 ft	$450 - $550	$1,600 - $2,200	$4,500 - $6,000
80+ ft	$550+	$2,200+	$6,000+

Final pricing varies by model, availability, delivery distance, and project requirements.

NorthPoint Equipment Rentals Locations

NorthPoint Equipment Rentals serves contractors and property owners across New Hampshire from multiple convenient locations.